CARTRIDGE INSTALLATION
The MyBottle ViruPur microbial purification cartridge is for use with MyBottle
water purification system. Each replaceable ViruPur Replacement Cartridge
will treat up to 100 liters (26 gallons) of water.
CHECKING THE LIFESPAN OF THE MYBOTTLE VIRUPUR
MICROBIAL PURIFICATION CARTRIDGE
The MyBottle comes with a cartridge life counter. This integrated mechanism
inside the bottle cap indicates when to replace your ViruPur Cartridge.
a.
Before each filling remove the cartridge/bottle cap from the bottle.
b.
Remove the ViruPur Cartridge with the Postfilter from the cap and lay
aside.
c.
Carefully rotate the life counter in a clockwise direction until it snaps into
the next position. This is best done holding the bottle cap in both hands.
d.
When the life counter is back at the starting point it is time to replace the
cartridge.
e.
Only use the included straw instead of purification cartridge if water
source has been treated and is safe for drinking (like most tap water).
Opening for straw
Cartridge life counter
“START” position
Figure 4
EN
151257-Kata-Interno_a 01/04/15 08.20 Pagina 3
