EN
DE
FR
NL
DK
SWE
NOR
FIN
IT
ESP
POR
5.
Elevate bag in convenient location. For best fl ow, position the fi lter in an
upright position and hang from the highest possible location. (Figure 4)
6.
Close the output hose valve. Connect the output hose to the connector at the
cap (this will initiate water fl ow into the output hose). Open hose valve clamp
to begin water fl ow. Close hose valve clamp to stop water fl ow. Ensure hose
valve clamp is in wide open position (not pinching hose whatsoever) while
fi ltering to ensure maximum fl ow rate.
FIELD PERFORMANCE TIPS
This product is designed to remove bacteria and protozoan cysts such as Giardia
and Cryptosporidium from water.
To extend cartridge life, always use the best
available water source along with the Filter Protector. Read
WARNING
on the end
of the manual before using this product.
Maintain your Katadyn water system to keep it operating properly.
1. If Water Flow is Slow
Check Outlet Hose: Ensure outlet hose valve clamp is in the wide open
position, not pinching the hose whatsoever. Ensure outlet hose quick connect
is securely connected to the quick connect on the cap or water will not fl ow
into outlet hose.
Clogged cartridge: A clogged cartridge requires cleaning and may require
replacement. As a solution in the fi eld, screw cap counterclockwise from the
bag to expose the fi lter cartridge and remove cleanable Filter Protector. Clean
Filter Protector by placing it on fl at surface and clean with damp sponge or
fabric. Next, swish cartridge in water to remove any built-up sediment. Hold
at quick connector to avoid submerging the fi lter in untreated water. If fl ow
(Figure 4)