background image

9

Plexy Gateway

User Guide

Plexy Gateway

1.8 Warranty

The KASTA 

Plexy Gateway

 carries a 2-year warranty against manufacturing 

defects.

Warranty Statement

1) 

2)

3)

4)

5)

6)

7)

The benefits conferred herein are in addition to, and in no way shall be 

deemed to derogate; either expressly or by implication, any or all other 

rights and remedies in respect to KASTA Technologies product, which the 

consumer has under the Commonwealth Trade Practices Act or any other 

similar State or Territory Laws.

The warrantor is KASTA Technologies Pty Ltd. With registered offices 

in all Australian States.

This KASTA Technologies Product is guaranteed against faulty 

workmanship and materials for a period of two (2) years from the date 

of installation.

KASTA Technologies Pty Ltd reserves the right, at its discretion, to 

either repair free of parts and labour charges, replace or offer refund 

in respect to any article found to be faulty due to materials, parts or 

workmanship.

This warranty is expressly subject to the KASTA Technologies Product 

being installed, wired, tested, operated and used in accordance with 

the manufacturer's instructions.

All costs of a claim shall be met by KASTA Technologies Pty Ltd, 

however should the product that is the subject of the claim be found to 

be in good working order, all such costs shall be met by the claimant.

When making a claim, the consumer shall forward the KASTA 

Technologies Product to the point of purchase with adequate 

particulars of the defect within 28 days of the fault occurring. The 

product should be returned securely packed, complete with details of 

the date and place of purchase, description of load, and circumstances 

of malfunction.

For all warranty enquiries, contact your local KASTA sales representative. The 
address and contact number of your nearest KASTA Technologies office can 
be found at http://www.kasta.com.au/contact-us or by telephoning Technical 
Support (02) 8999 1377 (KASTA Technical Support Hotline).

User Guide

Summary of Contents for KASTA-PGW

























Reviews: