Quantizer
Kassutronics
Load/Save
Autosave
The Quantizer automatically remembers all settings and the currently active scale, and restores
to the same state where you left o on powerup.
Load/Save scales
There are 12 slots for saved scales, represented by the 12 scale buttons.
To save the current scale, press
τ
Shift
+
. The
button will ash, and the scale
buttons light up to show the memory contents: empty slots are o, and used slots are
lit. Press the scale button corresponding to the slot you want to save in. Alternatively, press
the
key to cancel.
To load a saved scale from memory, press
. Again, the scale buttons light up to show
which slots have any data in them. Press the button from which you want to load the scale,
or press
to cancel.
1
To avoid excessive wear of the EEPROM memory, data is saved 10 seconds after the last time any relevant
button was pressed.
6
User manual version 1.1
