69 / 73
7.6. Important Warning!
•
Check the lining thickness periodi-
cally. If the lining thickness has fall-
en below half, more frequent checks
must be made and the lining must
be changed by applying to the au-
thorized service before the lining is
finished. In the same way, the wear
checks of the brake discs should be
made periodically, and if there are
excessive deformation and cracks
on the disc surfaces, an authorized
service should be immediately ap-
plied. In addition, the caliper piston
and bellows should be visually
checked and the operability should
be checked by moving the caliper
back and forth.
•
For the necessary controls and peri-
odic maintenance of the axles in
your vehicle, the points in the serv-
ice and maintenance instructions
booklet given by the axle manufac-
turer with your vehicle should be ap-
plied meticulously and in
accordance with the periods given
in the same booklet. Failure to carry
out such maintenance may affect
the service life of the axles of the ve-
hicle and may cause the axles to be
out of warranty in case of a possible
malfunction.
•
The healthy operation of the brake
system of the semi-trailer depends
on the use of the semi-trailer with
the same system and/or compatible
tractor. For this reason, it is obliga-
tory for the buyer to make the brake
adjustment adjustment at the au-
thorized service of the tractor com-
pany together with the tractor to
which these semi-trailers / semi-
trailers will be matched. In case the
semi-trailer is paired and used with
the tractor / tractors for which the
adjustment of the semi-trailer is not
made or cannot be made, the mal-
functions and damages that may oc-
cur in the brake system or the
tractor and the semi-trailer are out-
side the responsibility of our
company, and all responsibility in
this regard belongs to the buyer.
7.7. Trouble Shooting
7.7.1. Safety Regulations
There is a risk of accidents
due
to
unprofessional
troubleshooting.
Read the following safety regulations.
•
Comply with all laws, rules, and reg-
ulations to prevent accidents.
•
Comply with all environmental pro-
tection rules. Dispose of process
residues, cleaning aids and other
residues in accordance with these
rules.
•
Troubleshooting work should only
be carried out by trained personnel.
•
Before troubleshooting, park the ve-
hicle on a firm, and even surface
and level it, and make sure that it is
secured against sliding/tipping.
•
Upon completion of the repair, en-
sure that all protective devices are
correctly placed and secured.
•
Only use original spare parts!
