Higher driving height
3.2.2. Auto Reset
The auto reset lever can be controlled by
the same method as 3.2.1. manual sus-
pension control lever. When the EBS
socket is mounted and driving at a speed
defined by the producer, the lever will set
the driving height automatically.
Auto reset
3.2.3.
Electronic
Controlled
Air
Suspension (ECAS)
Electronic
controller
air
suspension
(ECAS) is an optional solution. This sys-
tem sets the driving height or defined dif-
ferent heights electronically. When the
EBS socket is mounted and driving at a
speed defined by the producer, the lever
will set the driving height automatically.
You may push the lower or raise button
and set the vehicle height.
ECAS control panel
3.2.4.
Manometer
(Axle
Load
Indicator)
The manometer which will show the axle
estimated axle load may be positioned at
the driver side. The manometer will con-
nect to fixed type axles air bags (non-
steering and without axle lifting).
When the air bag pressure is bigger, you
will
see
bigger
values
on
the
manometers.
Manometer
This manometer shows only
the estimated axle load. It can-
not
be
used
as
a
legal
measurement.
3.2.5. Smartboard (Info Center)
Thanks to Smartboard, the operator may
see failure codes, axle load etc. informa-
tion and control the axle lifting system.
