Rear pillar
4.5.2. Front pillar
There are pillars connecting the side
panel and the front panel at the front of
the vehicle.
Front pillar
4.6. Roof
4.6.1. Insulated Roof
Your vehicle has insulated roofs made of
sandwich panels.
Insulated roof
There are integrated cable channels on
the roof of the vehicle for pulling the tem-
perature sensor and interior lighting ca-
bles. With the help of the red plugs on
the roof, these cable channels can be
accessed
and
the
sensor
can
be
mounted.
Sensor channel
4.6.2. Interior Lighting
There are LED interior lights integrated
into the vehicle roof to facilitate loading/
unloading operations integrated into the
vehicle roof.
These lightings are connected to the ve-
hicle parking lamps. After the parking
lamps are turned on, these lamps are
controlled with the help of the mechani-
cal switch located in the vehicle rear right
or vehicle bumper area.
In vehicles with a tail lift, the interior
lights may be connected to the control
panel of the tail lift. In this case, it can be
controlled via this button.
