Kässbohrer PistenBully 400 4F, Operating Manual

Page: 97 / 164

Ope
ra
tion
Ch
ecks
U
se
Safety
Tech
ni
cal
da
ta
Ove
rv
iew
400 4F_11319.4.enu
97/162
Use

Raise the equipment carrier or blade frame just far
enough to enable the equipment to sit against the
adapter plate. If the centring wedges do not slip under
the adapter plate, a few sharp jerks will bring the auxil-
iary equipment into the correct position.

Switch the engine off.

Swing the eyebolts
5
inward, and tighten the nuts (with a
tightening torque of 250 Nm).

After approx. 10 minutes of operation, check the nuts
again and make sure they are correctly tightened.

Lower the auxiliary equipment.
Remove the rear-mounted auxiliary equipment before pro-
longed periods of pushing work.
The threaded
high-pressure couplings
are for connecting
and disconnecting filled hoses.
Check valves that enable or disable the flow, as appropriate,
are actuated automatically during coupling.
A = vehicle end
B = device end
Connecting the hydraulic coupling
B
A
A
UXILIARY EQUIPMENT