Instruction
Manual
2
4. Review wiring diagrams and make all connections.
*Note: When adding the “Door Open Sensor” (optional extra), it is important to remove the
wire jumper before adding wire.
5. Attach the 9v battery to the battery cable and rest in the housing.
6. Fix the “Alarm Module” to the utility box.
7. Ensure all conduit connections to the utility boxes are sealed with silicone to prevent moisture entry.
8. Plug the transformer cable into the K19670000946 power cable and then plug into the 100-240 VAC
power supply. LEDs will start flashing showing the unit is operational.
Installation (continued):
ENTRAPMENT ALARM
