Instruction
Manual
www.crh.com.au
Instruction
Manual
1
ENTRAPMENT ALARM
Features:
•
Easy push panic button
•
High output blue LED strobe lights
•
9V battery back-up
•
100db piezo siren
•
IP65 rated
•
12v plug-in transformer
•
Simple twist to reset
•
OH&S & Australian Building Code compliant
•
Simple plug & play installation
•
Optional “Door Open” alarm
•
Remote dialer connection
Installation:
1. Install the supplied utility boxes & conduit in the desired location (best location would be in the vicinity
of the “Inside Release Handle” for hinged doors or “Pocket/Lever Handle” for sliding doors.
The utility box for the “Alarm Module” should be mounted high on the wall where staff have an unob-
structed view of the flashing LED lights.
3. Plug the K19670000946 power/battery cable into either of the “HUB” sockets on the “Alarm Module”.
Then route the cable from the “Alarm Utility Box” to the location where the 100-240VAC outlet can be used
to plug in the supplied power transformer.
2. Feed the connection wire from the “Panic Module (K1967-007)” through conduit and connect to the
“Alarm Module (K1967-005)”. Refer to wiring diagram included on page 2.
We have also included an additional wire for your convenience if required. Fix the “Alarm Module” to the
utility box.
