5
SAFETY RULES & PRECAUTIONS
Proper safety precautions must be observed. Like all power equipment this unit must be handled carefully.
Do not expose yourself or others to danger. Follow these general rules. Do not permit others to use this
machine unless they are thoroughly responsible and have read, and understand the machine manual and
are trained in its operation.
• Always wear safety goggles for eye protection. Dress properly , do not wear loose clothing or jewelry
that could become caught in moving parts of the unit. Safe, sturdy, nonskid footwear should always be
worn. Long hair should be tied back. It is recommended that legs and feet be covered to protect from
flying debris during operation.
• Inspect the entire machine for loose parts (nuts, bolts, screws, etc.) and any damage. Repair or replace
as necessary before using the machine.
• DO NOT USE any attachment with this power head other than the ones recommended by our company.
Serious injury to the operator or bystanders could result as well as damage to the machine.
• Keep the handles away from oil and fuel.
• Always use proper handles and shoulder strap when cutting.
• Do not smoke while mixing fuel or filling tank.
• Do not mix fuel in an enclosed room or near open flames. Assure adequate ventilation. I Always mix and
store the fuel in a properly marked container that is approved by local codes and ordinances for such
usage.
• Never remove the fuel tank cap while the engine is running.
• Never start or run the engine inside a closed room or building. Fumes from the exhaust contain dangerous
carbon monoxide.
• Never attempt to make engine adjustments while the unit is running and strapped to the operator.
Always make engine adjustments with the unit resting on a flat, clear surface.
• Do not use the unit if it is damaged or poorly adjusted. Never remove the machine’s guard. Serious injury
to the operator or bystanders could result as well as damage to the machine.
• Inspect the area to be cut and remove all debris that could become entangled in the nylon cutting head.
Also remove any objects that the unit may throw during cutting.
• Keep children away. Onlookers should be kept at a safe distance from the work area, at least 15 METER.
(50 FEET)
• Never leave the machine unattended.
• Do not use this unit for any job other than those for which it is intended as described in this manual.
• Do not overreach. Keep proper footing and balance at all times. Do not run the unit while standing on a
ladder or on any other unstable footing location.
• Keep hands and feet clear of the nylon cutting head while unit is in use.