KW55293 Wireless Router
User Manual
16
5.2 Wireless Settings
There are five submenus under the Wireless menu (shown as bellow):
Wireless Basic
MBSSID ,WPS, Wireless Advanced, Wireless Repeater
. Click any of them, and you
will be able to configure the corresponding function.
5.2.1 Basic Wireless Settings
Choose m
enu “
Wireless
→
Wireless Basics
”, you can configure the basic settings
for the wireless network on this page.
Name
（
SSID
）：
Also called the SSID. Enter a value of up to 32 characters. The same
name must be assigned to all wireless devices in your network .
Band Width :
Select the channel width from the drop-down list. The default setting is
40MHz in Both Bands, which can adjust the channel width for your clients automatically.
Channel:
This field determines which operating frequency will be used. The default
channel is set to Auto, so the AP will choose the best channel automatically. It is not
necessary to change the wireless channel unless you notice interference problems with
another nearby access point.
SSID Broadcast:
When wireless clients survey the local area for wireless networks to
associate with, they will detect the SSID broadcast by the Router. If you select the Enable
SSID Broadcast checkbox, the Wireless Router will broadcast its name (SSID) on the air.
