ADSL ROUTER
USER MANUAL
19
Q: Initialization of the PVC connection failed?
A: Be sure that cable is connected properly from the DSL port to the wall jack. The
DSL LED on the front panel of the ADSL router should be on. Check that your VPI,
VCI, type of encapsulation and type of multiplexing setting are the same as what
you collected from your service provider, Re-configure ADSL router and reboot it. If
you still can not work it out, you may need to verify these variables with the service
provider.
If the cause is not given above
，
please contact your local service provider!
