background image

10

800 Deere Rd.

Prescott, WI 54021

Phone: 715-262-4488  -  Fax: 715-262-4487

www.KascoMarine.com     [email protected]

Customer Repair Form

* Important Reminders *

• 

All repairs sent in MUST be accompanied by a copy of this completed sheet!

•  Address your Repair to Kasco Marine, Attn: Repairs (or to your Authorized Repair Center.

•  Shipping to Kasco or an Authorized Repair Center is paid for by the customer.

• 

You must include the power cord with each unit sent in for repair to be considered for warranty repair!

•  Do not ship the control box with the unit for repair, unless otherwise instructed.

Today’s Date:___________________

Customer Information

Name: 

_________________ 

    Phone 

Number: 

_____________________

Address: __________________________   

 

Alternate Number: ___________________

City: 

____________________    Email 

Address: 

______________________

State: _____________________

Zip Code: ______________________

Unit Information:

Model # (Ex. LED3S19): ____________________

Serial # (Ex. 2101LEDS3025)___________________

Date Purchased: ________________________

Purchased From: _________________________

Earliest Date of Problem: _______________________

Description of Problem:

Comments:

Summary of Contents for WaterGlow LED3S19













Reviews: