7
Step 4
On the underside of the float, line up the (3) bottom screen clips
(J)
and start threading in the (3) 3/8
–
16 x 1/2’’ s
errated hex head
screws
(K)
, but do not tighten down at this time. Be sure the clips can slide back and forth freely.
Allow movement
Step 5
Take the
¾’’ mesh screen
(L)
and wrap into a cone shape by overlapping both vertical edges by approximately 1 inch and aligning top
and bottom edges of mesh as shown. Secure mesh vertical seam at the top, bottom and middle using (3) cable ties
(M)
.
Step 6
Insert the metal bottom screen
(I)
inside the mesh cone with approximately 2 inches of mesh overhanging the top ring of the screen.
Attach mesh to the top ring of the screen in (3) equally spaced locations using cable ties.
Summary of Contents for VFX Series
Page 18: ...18...
