background image

ROBUST-AIRE MANUAL

4

LARGE CABINET INSTALLATION

Choose a location far enough from shore to avoid potential flooding. If you use plantings to help hide the 

cabinet, be sure that both the inlet and the outlet vents are clear, as the compressor requires airflow to 

prevent overheating. The best foundation options include pea gravel, rubber mulch, and cement.

Place the assembly directly on the ground or attach it to a concrete pad. Use the holes on the bottom 

flanges to anchor the cabinet. 

Place the cabinet adjacent to the electrical service which will power the system. The cabinet has 6-foot 

power cords with plugs. 

DO NOT USE EXTENSION CORDS.

For remote manifold installation information, see supplementary instruction sheet.

Use the clamps 

included with the 

SureSink Tubing 

kit to complete 

connections to the 

compressor.

3/8" mounting holes (x4)

 37" 

 17 1/16" 

 42 1/8" 

 20 11/16" 

 19 5/8" 

REV.

ECO#

DESCRIPTION

DR'N BY

DATE

DES ENG CH'K BY

1

INITIAL RELEASE

774085

DO NOT SCALE DRAWING

C.A.D. GENERATED DRAWING

800 DEERE ROAD

PRESCOTT, WI 54021-1241

MANIFOLD, COMPLETE ASSEMBLY

RA, 4 COMPRESOR, CABINET

5052 Aluminum

THIS DRAWING CONTAINS PROPRIETARY

INFORMATION AND SHALL NOT BE USED,

REPRODUCED OR DISTRIBUTED WITHOUT

THE PRIOR WRITTEN CONSENT OF

KASCO MARINE, INCORPORATED

.X   .02 [.508]  .XX   .010 [.254]
.XXX   .005 [.127]  ANGULAR   0.5

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES.

DIMENSIONS IN [  ] ARE MILLIMETERS.

   TOLERANCES ON:

THIS DOCUMENT HAS BEEN ISSUED 

FOR ENGINEERING INFORMATIONAL

PURPOSES ONLY. ANY REVISIONS 

TO THE CONTENT OF THIS DOCUMENT

MUST BE INCORPORATED INTO THE 

ORIGINAL CAD FILE.

THIRD ANGLE PROJECTION

TITLE:

774085

SHEET  1 OF 1

FINISH:

MATERIAL:

SCALE:  1:5

DWG. NO.

774085

DO NOT SCALE DRAWING

C.A.D. GENERATED DRAWING

800 DEERE ROAD

PRESCOTT, WI 54021-1241

MANIFOLD, COMPLETE ASSEMBLY

RA, 4 COMPRESOR, CABINET

5052 Aluminum

THIS DRAWING CONTAINS PROPRIETARY

INFORMATION AND SHALL NOT BE USED,

REPRODUCED OR DISTRIBUTED WITHOUT

THE PRIOR WRITTEN CONSENT OF

KASCO MARINE, INCORPORATED

.X   .02 [.508]  .XX   .010 [.254]
.XXX   .005 [.127]  ANGULAR   0.5

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES.

DIMENSIONS IN [  ] ARE MILLIMETERS.

   TOLERANCES ON:

THIS DOCUMENT HAS BEEN ISSUED 

FOR ENGINEERING INFORMATIONAL

PURPOSES ONLY. ANY REVISIONS 

TO THE CONTENT OF THIS DOCUMENT

MUST BE INCORPORATED INTO THE 

ORIGINAL CAD FILE.

THIRD ANGLE PROJECTION

TITLE:

774085

SHEET  1 OF 1

FINISH:

MATERIAL:

SCALE:  1:5

DWG. NO.

Back to Contents

Summary of Contents for Robust-Aire RA10












Reviews: