background image

RM-100 FLOOR MOUNT MANUAL

3

PRODUCT & INSTALLATION OVERVIEW

Featuring durable stainless steel, Kasco’s RM-100 Floor Mount positions CertiSafe™ Tank Mixers securely 

within the tank for effective water movement. This manual will provide instructions for mounting a CertiS

-

afe™ unit using the RM-100 and installing the entire assembly within the tank.

•  Read these instructions thoroughly prior to installation.

• 

Contact your CertiSafe™ representative for specific recommendations as necessary. 

•  Verify that the hatch opening is at least 24” (square) or 25” (round) to accommodate the assembled 

unit with mount.

•  The cord grip and cable support equipment described here are supplied with the mixer unit.

•  To prevent galling, we recommend a moisture-cured, polyurethane compound sealant suitable for 

contact with potable water and certified to meet the shrinkage for interior and exterior use. Refer to 

NSF/ANSI Standard 61 for indirect additives.

• 

Be aware of clearance between the mixer asse    mbly and any fixed objects within the tank, including 

ladders, ensuring that there is enough room for the CertiSafe™ unit to function correctly and avoid 

damage to any protective coatings.

•  Please consult your CertiSafe™ sales representative for mixer mount placement, retrieval, and inspec-

tion requirements.

Some parts will arrive pre-assembled from Kasco; however, all assembly steps are listed for reference.

Back to Contents

Summary of Contents for CERTISAFE RM-100



















Reviews: