PM-100 PIPE MOUNT MANUAL
13
6.
Move the entire assembly into place over the installed upper mount base (A).
7.
Align the slot of the pipe bracket (B) with the shoulder screw (E) installed in the upper mount base.
8. Lower the pipe bracket until it rests on the shoulder screw.
9. Install the
1/2”-13 x 1-3/4” serrated flange screw (D) in the top hole on the bracket and secure with a
serrated flange nut (F).
Steps 6 through 9 are best completed with two people.
Adjust the position of the CertiSafe™ unit
by swiveling the pipe either direction and/
or moving it vertically through the upper
mount pipe bracket.
MOUNT ASSEMBLY (CONT.)
F
D
B
E
A
6
9
Back to Contents
