manualshive.com logo in svg

Kasco 2400D, Operation & Maintenance Manual, Page: 14 / 15

Share
Download
Kasco 2400D Operation & Maintenance Manual Download Page 14

DE-ICER MANUAL

13

715.262.4488

Kasco Marine

800 Deere Road

Prescott, WI 54021

kascomarine.com  |  sales@kascomarine.com

CONTACT US

Kasco only accepts complete assemblies for warranty repair. We must receive the power cord and 

all other components with the motor as originally assembled, without the float or mount. Kasco 

will bill the customer to replace any missing parts necessary for repair. It is not necessary to return 
the control panel, mount, or other parts with the motor assembly, unless a Kasco representative 

specifically requests it.

Please attach a repair form with the shipment. The repair form must include a name, physical 
address (for return delivery of the repaired unit), daytime phone number, and an e-mail address 
for correspondence regarding the warranty claim.

Any expedited shipping method for the return of the unit is at the customer’s expense. Kasco will 
return units repaired under warranty at our expense via ground freight within the continental 
United States.

3020379

ANSI/UL 778: 2016

Ed.6+R:22Feb2017

CSA C22.2 #108: 201

4 Ed.5

Back to Contents

Summary of Contents for 2400D
















Reviews:

No comments