7
STEP TWO (ALTERNATE INSTALLATION)
In ponds where the water level fluctuates significantly, you
may need to suspend a small weight (12” of 1” galvanize
pipe works well) at the mid-point of the rope to take up any
slack as the water level drops. The weight should be light
enough so the Aerator can rise as the water level rises. This
can also help hide ropes by sinking them further below the
surface.
Normal Water level
Power Cord
Anchor Rope
Secondary Weight
Low Water Level
High Water Level
STEP THREE
At this time the Aerator is ready for operation.
Once your Aerator is properly installed and secured, you
can now connect the unit to a 12 Volt DC battery.
Warning! Spark \ Explosion hazard, make sure switch
is in the off position before connecting or disconnecting
clamps to battery or replacing fuse.
ON
OFF
The Red clamp connects to the Positive (+) side of the bat-
tery, and the Black clamp connects to the Negative (-) side
of the battery. It is recommended to momentarily connect
to verify the unit is stable in operation before letting the
unit run unattended.
ENJOY YOUR NEW KASCO EQUIPMENT!
