18
Note: Apply blue thread lock to all screws, balls, and threads which it be
fixed to metal-parts. For non-metal parts apply CA Glue.
ENGINE MOUNT ASSEMBLY
1) Insert the M3x12 screws to attach the engine side mount to the engine center mount. Make sure the screws
are not too tight and the engine side mount can be able to slightly move forward and backward.
2) Put the engine on the engine side mounts. Pull the engine down slightly and use M4x20 screws to lock the
engine. Do not tighten up the screws yet.
3) Make sure that the engine is attached to the side mount firmly. Then slightly tighten the screws again without
locking it.
4) Check that the engine is perfectly square front and back and side to side to the engine center mount. Tighten
all screws locking the engine firmly.
5) If unsure that the engine is installed properly, restart the process from step 2 again.
6) If you are certainly sure that the engine is properly installed, take off the M4x20 screws individually one at a
time to apply thread lock and tighten it firmly.
ENGINE INSTALLATION
10
Engine
Socket screw M4x20
Washer 4x8x0.7
Washer 3x8x1.5
Socket screw M3x12
