Page - 2 - of 8
LS-8015-ZW-MM-BG
General Information:
x
Exit setting mode: Enter * to exit the setting procedure, or
wait for 10 seconds
x
Low battery warning: When the voltage drops below 5.2V
after entering a valid code, the lock beeps for three times.
x
Unlocking indicator: Music sounds and motor rotate.
x
Locking indicator: Red Light flashing one time, and music
sounds and motor rotate.
x
Restore Factory Default
a. Disconnect 1pcs battery
b. Press and hold the reset button
c. While holding the reset button, reconnect the
battery
d. Until the lock beeps, release the reset button.
e. Press digit
‘
1
’
to restore factory default or other
digit to abort reset procedure.
f. The lock must be set up again after the reset is
complete.
Warning: After restore, all existing user codes and
programming code will be erased, default
programming code will be restored , but the
enrolling of lock with gateway will not be erased.
The reset button is located below the battery holder.
(See Picture)
