New Job Setup:
1. Ensure Crease Matic is in ‘setup’ mode. Decimal
2. Push card gently to infeed wheels. The Crease
point in last position of screen and LED off. Select
Matic will feed the card to the creasing blade.
job number to program, then press ‘crease’.
3. Press the ‘left’ key until distance from edge
4. Press forward again until distance from
is reached (99.00mm). Press creaser button
1st crease is reached (198.00mm).
Press creaser button
5. Press forward again until sheet is out onto the
6. Press forward again until sheet is out onto
collection tray, the next sheet will now go in and the
the collection tray, the next sheet will now go in and the
same creases will be repeated,
same creases will be repeated,
http://www.monomachines.com
http://www.monomachines.com
