•
NEVER install the Avionaut Kite children’s car seat on the seats equipped with
airbags. Such installation may cause serious injuries or even death.
•
ALWAYS install the Avionaut Kite children’s car seat backwards to the direction
of travelling, while the holder of the car seat should be set in a leaning position
(picture G-1).
•
The front passenger seat should be set in the farest back position.
•
Pull the car’s seatbelts maximally and put its hip part through the upper slot
meant for the hip safety belt (picture C).
•
Buckle the safety belt.
•
Put the chest part of the car’s seatbelt through the slot meant for the chest
safety belt, which is located at the back of the car seat holder in a ,,blocked”
position.
•
Now the Avionaut Kite children’s car seat is properly installed.
III. Regulation of the car seat’s holder
In order to change the holder’s position forwards or backwards, you should press buttons
situated on both sides of the car seat, at the same time. The buttons will go back to their initial
position as soon as the proper position of the holder is found.
There are four positions of the holder (picture G).
1.
Car position
2.
Carrying position
3.
Sleeping / Rocking position
4.
Sitting position / carry-cot
In order to find a needed position of the holder:
•
Use both hands to press the two red buttons which regulate the position of the
car seat’s holder (picture G).
•
Move the holder to the position that you require, until you hear a loud and clear
,,click” sound, which is the sound of snapping shut.
