PARTS DESCRIPTION
INSTALLATION INSTRUCTION
Caution: Please unplug the appliance before installation.
1.
Base installation
•
First, insert the base into the base plate, then use the base fixing knob to fix the base
with the base plate.
2.
Grille and fan blade installation
A.
Rear grille
•
Unscrew the fan
blade knob from the motor shaft in clockwise direction. (Fig.1).
•
Unscrew the grille knob from the motor shaft in anti-clockwise direction. (Fig.2).
•
Set the rear grille and fit it well on the three position poles and make sure these poles
are properly put through the holes on the rear grille. Hold the rear grille and tighten
the grille knob in clockwise direction on the motor shaft (Fig. 3) .
Fig.1 Fig.2 Fig.3
B.
Fan blade
•
Install the fan blade through the fan blade position hole. Ensure the fan blade grooves
fit the motor shaft fixing pin and push in until it reaches the fixing pin (Fig. 4).
•
Install the fan blade knob in anti-clockwise direction onto the motor shaft until it is
tightened. Please hold the fan blade when installing the fan blade knob (Fig. 5).
Fig.4 Fig.5
C.
Front grille
•
Loosen the screw on the bottom of the grille and fit the front grille with the grille
ring onto the rear grille. After they are fitted correctly, tighten the screw again on the
bottom until the grilles are tightly fixed together (Fig. 6).
Fig.6
-4-
Grille
Fan blade
Grille ring
Height adjustment pole
Base
Base plate
Timer knob
Speed button
position
poles
grille knob
Fan blade
position hole
Fan
blade
groove
Motor shaft
fixing
pin
Motor
shaft
screw
-5-
