OPERATING AND HANDLING
SILVER STRETCHER
20
Rev.4
28.11.22
2.3.8. Dismantling-assembly of the stretcher belts.
Anchoring with a plate.
Loosen the screws as shown in the following figure. To assembly them just follow the same
process but in reverse order.
To assemble them just follow the process in reverse order, fastening the ‘A’ screws to the ‘B’
nuts inside the guides of the aluminium profile guide.
2.3.9. Position of the belts.
2.3.9.1. Lateral belts.
The belts are positioned at the approximate distances shown in the figure below.
390
840
1970
Summary of Contents for Silver TG-1100
