Kartsana Silver TG-1100, Instruction Manual

Page: 16 / 40

OPERATING AND HANDLING
SILVER STRETCHER
14
Rev.4
28.11.22
Battery(ies) damaged Replace with new battery(ies)
Batteries very low
Charge using the external
charger
8
Failure in recharging
process
Contact technical support Contact technical support
9
More than 22 seconds
have elapsed in the
upward movement
Discharged battery(ies) Charge battery(ies)
Failure in hydraulic system Contact technical support
The mechanism does not
move freely
Check mechanism in search of
some excessive friction or
interference between parts
10
More than 22 seconds
have elapsed in the
downward movement
Discharged battery(ies) Charge battery(ies)
Failure in hydraulic system
Check for possible oil leaks.
Contact technical support
The mechanism does not
move freely
Check mechanism in search of
some excessive friction or
interference between parts
11
Intensity greater than 48A
Stretcher overloaded
Do not load the stretcher with
more than 300 kg.
Discharged battery(ies) Charge battery(ies)
The mechanism does not
move freely
Check mechanisms in search
of any excessive friction,
blocking or interference
between parts.
12
Voltage lower than 15V
Stretcher overloaded
Do not load the stretcher with
more than 300 kg.
Discharged battery(ies) Charge battery(ies)
The mechanism does not
move freely
Check mechanisms in search
of any excessive friction,
blocking or interference
between parts.
After any fault or incident, we must restart the system pressing the three keys at
the same time for 1 seconds.
The system will automatically go on STANDBY if more than 15 minutes pass
without any action being carried out. It will restart by pressing the yellow button
for 2 seconds.
If we perform continuous stretcher raising and lowering movements for 2 min.
we should then stop for 10 sec. for the system to recover and we can continue
operating without problems.
Removing the battery is advised if the stretcher will remain unused for long
periods of time.