Kartsana JUPITER TG-880 C, Instruction Manual

Page: 6 / 32

OPERATION AND HANDLING OF
CART TG-880-C COMPACT STRETCHER
3
2.2.1.- Removable cuffs
To remove the 4 grips from the ends, press the button located on the top of the grip,
and then pull on the grip to extent its length until it reaches the stop.
To return the cuff to its original position, press the top button again and push it as far
as it will go in the original position.
2.2.2.- Adjustable reclining
headrest
Apply the lever below the headrest and move it to the required position. Then release
the lever so that the headrest is locked in the required position.
The setting of the shock absorber can become loose because of temperature
fluctuations and thus it does not remain in its setted position. This is no defect and no
case of warranty. The shock absorber can easily be re-adjusted following the
instructions in the separately attached instruction sheet.
2.2.3.- Adjustable leg rest

Button for adjusting the leg inclination
The required inclination of the leg rest can be obtained by pressing button A and
moving the leg rest manually. Once the correct inclination has been reached,
release button A to automatically lock the leg rest.
Top button
The top adhesive on the part
of the stretcher shown in the
drawing on the left indicates
how to manipulate the cuff in
order to extend it..