KARMETAL KMT 280 WOS, Operation Manual

Page: 19 / 89

19
5. Turn on the machine's main switch. The LCD display (monitor) comes on with the
KARMETAL logo.
Note : If the ‘emergency stop button’ is depressed, it must be released for the machine to
run.
6. After turning the main switch on, wait until the monitor displays “Manual mode” page.
While in this page press the “
 ” ‘key just underneath the “saw frame” icon as shown in the
following figure. The saw frame (bow) should rise. If the saw frame does not rise, change
power lead connections, by reversing any two of the power leads in the power cord. Make
sure you repeat steps 2 to 6 of this procedure.
Final Inspection Checklist before Operation
After installing the machine, a final inspection should be performed by considering the
following checklist;
Any missing components, guards or panels
Removal of the shipping brace
Lost fasteners and fittings, hoses and conduit
Missing or damaged items
Coolant, oil, or hydraulic leads
Tools and others materials left on saw
Safety measures, general condition and readiness for use