Karmann Ontario, Operating Instructions Manual

Page: 30 / 73

D FURNITURE Ontario 635 (SIDE SEATING AREA) D
Table in seating group
4-3
Safety belts in the
seating group
Lower tabletop
Lift the table slightly at the front edge.
Pull the table leg downwards and
hinge it backwards. then lift the
tabletop out of the guide rail and lay it
on the bench rails.
In order to return the table to its
original position, click it into the guide
rail and hinge the table leg down.
Caution
Make sure that the table is correctly
clicked in. If so, red knob A projects.
Extending tabletop
The Ontario 635 has an extending
tabletop in the found seating group. In
order to pull out the table, lift the
tabletop slightly and pull it back to the
stop. The extra leaf for the table is on
the floor of the wardrobe.
Caution
Push in the table during travel and
secure the extra leaf in the holder in
the wardrobe.
The seating group is fitted with two
three-point automatic seat belts as
standard, facing in the direction of
travel. Further automatic belts
(against the direction of travel) may
be purchased as optional extras.
Lap belts can be purchased as
optional extras to be used against the
direction of travel.
Note
Belts built in subsequently may only
be fixed at the points provided on the
benches. A maximum of two
complete belts can be installed at
each bench.
Installation should be carried out by
an approved dealer.
A