22
SUGGESTION:
●
Please transfer to a seat in the car if at all possible.
4.18 Before use
CAUTION:
●
The VIP-505 and VIP-515 were tested with a four point webbing system,
with the back in the upright position. Please leave the headrest in place
during transportation.
4.18.1 Please detach all easily removable accessories from the wheelchair and
stow them in a safe place where they cannot move around and
become a safety hazard.
4.18.2 A four point tie-down system should tightly fasten to the lower
wheelchair frame marked with a yellow sticker as pictured.
4.18.3 An occupant restraint system using both a pelvis and
harness must also be fastened to the transport vehicle to
insure user safety. Please refer to the restraint system's instructions.
4.18.4 The attendant / transporter must double-check all fastening points for
proper connection and tightness to assure the wheelchair users safety.
The attendant / transporter must be fully cognisant of the fastening
system's usage and its weight limitations.
4.18.5 See
http://www.unwin-safety.com/
for more information.
4.19 Method of Restraint
4.19.1 The VIP-505 and VIP-515 were tested with four point webbing systems,
with the back in the upright position. Please refer to the restraint
manufacturer
’
s user guide for further details of its operation.
4.19.2 Fitting the front restraint
4.19.3 Connect the straps around the wheelchair frame and caster bracket as
pictured below. The anchor point is marked with a yellow sticker.
Summary of Contents for VIP 505
