10
4. OPERATION
4.1 Preparing For Use
4.1.1 Unfolding
4.1.1.1 Holding the armrests, pull outwards. (See Figure 4.1)
4.1.1.2 Pointing your fingers inward with the palm of your hand on the
frame, push down until the seat is fully lowered. Make sure the
frame is firmly seated in its holder. (See Figure 4.2)
4.1.1.3 Holding the swing-away footrest, lower it into its coupling at 45°
from the side. Swing the footrest towards the middle until you hear
it click into place. (See Figure 4.3)
4.1.1.4 Flip the footplates down. (See Figure 4.4)
4.1.1.5 Attach the headrest and tighten the knob bolts. (See Figure 4.5)
4.1.1.6 Ready for action!
CAUTION:
●
Please be sure to tighten the knob bolts of the headrest or else it might
result in injury to the user or damage to the wheelchair.
Alternatively, you can stand at the side of the chair and complete step 1 by
pulling the nearest armrest towards you and pushing the other one away.
Figure 4.1
Figure 4.2
Figure 4.3
Summary of Contents for VIP 505
