EN8
EN9
Inspired by life
Step5.
Detach the legrest assembly of both
sides (4).
Step6.
Unplug the connectors (5) on both
sides of the junction block.
Step7.
Take out the cable set from the hole
(6) of the top cover.
Step8.
Remove the four screws (7) on the
bracket of the actuator module of seat tilt
or seat lift. Then remove the whole seat
assembly.
4
5
6
7
Please be careful when carrying the heavy seat
assembly. To avoid injury or wheelchair component
damage, request two people to carry it.
Step9.
Remove the screws (8) of the seat
interface panel.
Step10.
Remove the screws (9) of the top
cover.
Step11.
Remove the connectors (10) of the
headlight on both sides.
Step12.
Remove the top cover. Cut off the cable
ties (11) of the motor.
9
10
11