Karma MGNM-SLN, User Manual

Page: 70 / 96

65
Please, make sure the following conditions are fulfilled to obtain a
safe transportation:
- Whenever possible the occupied wheelchair shall be located in a
forward-facing configuration and secured by the tie downs in
accordance with the WTORS (wheelchair tie down and occupant-
restraint system) manufacturer’s instructions.
- This wheelchair is suitable for use in vehicles and has met the
performance requirements for travelling forwards-facing in frontal
impact conditions. Its use in other configurations within a vehicle has
not been tested.
- The wheelchair has been dynamically tested in a forward-facing
orientation with the ATD (anthropomorphic test device) restrained by
both pelvic and upper torso belts.
- Both pelvic and upper torso belts should be used to reduce the
possibility of head and chest impacts with vehicle components.
- When possible, other auxiliary wheelchair equipment should be
either secured to the wheelchair or removed from the wheelchair and
secured in the vehicle during transit, so that it does not break free
and cause injury to vehicle occupants in the event of a collision.
- Positioning supports should not be relied on for occupant restraint
in a moving vehicle unless they are labeled as being in accordance
with the requirements specified in ISO 7176-19:2022.
-
The wheelchair should be inspected by a manufacturer’s
representative before reuse following involvement in any type of
vehicle impact.
- Alterations or substitutions should not be made to the wheelchair
securement points or to structural and frame parts or components without
consulting the manufacturer.
- Only use "gelled electrolyte" batteries on powered wheelchairs when
used in a car.