37
CAUTION
●Before performing any maintenance, be sure to turn the power OFF and
unplug the charger if connected.
●DO NOT over-tighten hardware. This could cause damage to the frame and
hardware.
SUGGESTION
●
Do not directly spray water on your wheelchair to wash it, as this could
lead to a malfunction in the electric system.
●
Do not use gasoline, solvents or other abrasive solutions; the casing may
become deformed or damaged.
WARNING
●
After ANY adjustments, repair or service and BEFORE use, make sure that
all hardware is tightened securely; otherwise injury or damage may occur.
7.5 Suggested Maintenance Procedures
7.5.1 Before using the powered wheelchair, make sure all nuts and bolts are
tight.
7.5.2 Check all parts for damage or wear and have a qualified technician replace
it if necessary.
7.5.3 Check all parts for proper adjustment.
7.5.4 Ensure that the batteries are properly maintained and charged as
required.
7.5.5 Inspect brake for proper operation.
7.5.6 The wheels and tires should be checked periodically for cracks and wear,
and should be replaced by a qualified technician.
7.5.7 Regularly check for loose nuts and/or bolts in the front and drive wheels. If
loose, have them adjusted by a qualified technician.
7.5.8 Clean dirt, dust and grease from exposed components.
7.5.9 A qualified technician can be found with an authorized distributor/dealer.
Summary of Contents for KP-45.6
