26
4.20.2.2 Take the brakes off and reverse the wheelchair to tension the front
straps. Apply the wheelchair brakes (the brakes should be left on
during transport).
4.20.3 Fitting the rear restraint
4.20.3.1 Attach rear straps into the rail approximately 300 mm behind the
wheelchair backrest.
4.20.3.2 Attach the hooks to the wheelchair tie-down brackets at the rear of
the wheelchair as pictured below. Tension the restraint until the
wheelchair is secure.
Fitting the front restraint
Fitting the rear restraint
4.21 Fitting Seat Belt
4.21.1 Fasten the three point safety belt around the user.
4.21.2 The occupied wheelchair should be located in a forward-facing
configuration, with the parking brake applied.
4.21.3 Pelvic restraints should make full contact across the front of the body
near the junction of the thigh and pelvis as pictured below (correct
seat belt position).
4.21.4 Restraints should not be held away from body by wheelchair
components such as armrest or wheels as pictured below (Incorrect
seat belt position).
Correct seat belt position
Incorrect seat belt position
Summary of Contents for KM-5000.2
Page 1: ...Manual Wheelchair User Manual MVP 502 Series KM 5000 2...
Page 2: ......
Page 12: ...5 Figure 2 1 Figure 2 2 Figure 2 3 Figure 2 4 Figure 2 5...
Page 47: ......
