15
WARNING:
●
Anti-tippers MUST be equipped, when the backrest angle is set as
greater than or equal to four degrees.
4.7 Seat Depth Adjustment
4.7.1 Remove both of the rear wheels and the seat upholstery. Lift the frame
up and place it gently on a levelled table or place.
4.7.2 Use the tool provided by KARMA to loosen the bolts on the axle plate of
quick release rear wheel. (See Figure 4.24)
4.7.3 Move the fixing plate of backrest tube and the axle plate of quick
release rear wheel backward. (The length of adjustment depends on the
accessory equipped. It can be 1" or 2" long).
4.7.4 Insert the optional extension tubes. (See Figure 4.25)
4.7.5 Tighten the screws to fix the extension tubes. (See Figure 4.26)
Figure 4.24
Figure 4.25
Figure 4.26
4.7.6 Position back the axle plate of quick release rear wheel, and re-tighten
the bolts.
4.7.7 Re-assemble the rear wheels.
4.7.8 Add the seat depth extension strip at the front of the seat, and place
back the seat upholstery. (See Figure 4.27)
4.7.9 Cover the seat depth extension strip with the extended part of the seat
upholstery. (See Figure 4.28)
Figure 4.27
Figure 4.28
