36
6.1.2 Before charging batteries, make sure the charger has been set to
the correct voltage setting by setting the 110V<=>220V switch
to match the local AC voltage. If it is not correctly set, this will
cause damage to the charger. Before changing the switch setting,
ensure the charger is disconnected from AC line voltage.
6.1.3 The battery will detect the internal temperature of itself when
being charged. It will automatically trigger the protecting
procedure to inhibit charging if the temperature is too high.
When the battery is cooled down, it will trigger the charging
automatically.
1. AC Power Cable
2. Charger
3. DC Power Cable
4. AC Power Socket
5. Voltage Switch
6. ON/OFF Switch
7. Status Indicator
8. Battery Capacity Indicators
CAUTION
●
Before charging batteries, make sure the charger has been set to
the correct voltage setting. If it is not correctly set, this will cause
damage to the charger.
●
Before changing the switch setting, ensure the charger is
disconnected from AC line voltage.
Summary of Contents for eFlexx EFL-14
