25
5.15.3 The parking brakes are not designed to be used for a moving
wheelchair.
5.15.4 Release the joystick to engage the electromagnetic brake to stop
the wheelchair when it is powered on. Or use the handrims for
braking when the wheelchair is propelled manually. Make sure
that the interval between the tires and the brakes complies with
the given specifications. (Figure 5.38)
5.15.5 To adjust the interval between the tires and the brakes, first
loosen the bolts and set the appropriate gap. Then re-tighten the
bolts. (Figure 5.39)
CAUTION
●
After each adjustment of the rear wheels, check the interval
between the tires and the brakes and re-adjust the brakes if
necessary.
5.16 Wheel
Do not touch the wheels when they are rotating to prevent the user's
hands or fingers from being pinched.
5.17 Parallel Swing Away mechanism
5.17.1 Insert the parallel swing away
controller assembly into the armrest
tube.
5.17.2 Adjust it to an appropriate position
and retighten the screw.
5.17.3 The wheelchair has a side steering control unit, which is either
mounted on the left or right armrest. The joystick module can be
mounted on a swing away mechanism. This system enables you
to sit close to a table.
Summary of Contents for eFlexx EFL-14
