WHAT YOU WILL NEED
C.
0
S I D E P A N E L x 2
F.
0
S I D E B R A C K E T x 4
I.
0
A L L E N B O L T S 1 ” x 1 6
G.
0
S U P P O R T B R A C K E T
S C R E W S x 8
W A S H E R x 8
A L L E N W R E N C H x 1
J.
0
F I G U R E 1
02
K.
0
L.
0
STEP: 01
STEP: 02
Set Side Bracket ( F ) on the Side Panel ( C ) as shown below in Example 1.
Place bracket so the two holes are against the Fabric. Next, place the 1”
Allen Bolt ( I ) into the two holes and �ghten using Allen Wrench ( L ) as
shown in Example 2.
DO NOT OVERTIGHTEN.
Repeat un�l all four
brackets have been a�ached on both the Side Panel (E).
SEE FIGURE 1
SEE FIGURE 2
Use the Screw ( J ) and Washer ( K ), loosely screwing them into the four
holes in the middle of the side panel. The Support Bracket ( G ) will be
placed behind the washer. Once is is secured, �ghten the screws.
DO
NOT OVERTIGHTEN.
F I G U R E 2
