9
2 ( X2 )
1 ( X4 )
Preparation
1) Remove the packaging leaving the wash unit mounted on the pallet so that it is easier to transport.
Remove the wash unit protections and any accessories contained in the packaging itself.
2) Position the wash unit and mark the fixing points (Fig. 2). Drill holes for the anchor bolts.
Fixing the wash unit
WARNING: Prepare the holes for the drain and electrical power supply, if applicable before fixing
the wash units, either in side-by-side arrangement or with side drain.
INSTALLATION
1) Undo the screws (1) fastening
the rear casing.
2) Undo the two screws fixing the
wash unit to the pallet (2) and
position the wash unit in the spot
prepared for installation.
Instructions for Installation, Use and Maintenance
