INSIDE BED W
ALL
#2=
Center RACK over bed and tighten FRONT
MOUNT BOLTS. On REAR MOUNT BOLTS be sure
LOCK PINS slide IN & OUT smoothly and freely
before tightening the rear BOLTS.
J
©2011 KARGO MASTER
--'Pro3'_4.1
THAT'S IT!
You're ready to
use and enjoy your
KARGO MASTER
TRUCK RACK!
#1=
Tighten down
ALL
NUTS AND BOLTS, except LEG FOOTPLATES and CENTER CROSS BAR .
DO NOT
OVER TIGHTEN ON DOUBLE WALL BED CONSTRUCTION, AS THIS MAY DEFORM THE
SHEET METAL OF THE PICKUP BED!
3/8"
3"
8
(OPTIONAL
BED SUPPORT)
STEP 11
#4=
Modern truck beds are made from thin steel with
limited load bearing capacity. Approximately 75% of
the rack load is carried by the front legs. Because the
rack is wider at the bottom than the top, overhead
loads tend to push the bed walls down and apart.
If you expect to carry heavy loads,
we strongly suggest that you purchase
and install
OPTIONAL
BED SUPPORTS
as shown below.
C
#3=
Snug bolts in CENTER CROSS BAR .
C
Pro3&4
_4.1
