For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Page 15
Instructions
–
4A97L
Step 8
–
Install Ladder Stop
•
Use a 3/8” x 1” hex head bolt, two 3/8” flat washers and a 3/8” nyloc nut
to attach the ladder
stop on the front bow. Be sure to place the tab on the ladder stop into the slot on the bow.
•
Use the hardware in the rear bow to bolt ladder stop in orientation shown. Be sure to place
the tab on the ladder stop into the slot on the bow.
TIGHTEN
Front Bow shown below
Rear Bow shown below