Installation Instructions – 4A934
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Page 4
DO NOT EXCEED MANUFACTURERS WEIGHT CAPACITY FOR ROOF
Step 1 – Assemble Feet
Measure width between installed mounts on vehicle.
On the cross bows, use the slots that correspond to the measured distance between the mounts.
Bolt feet to bows as shown, DO NOT TIGHTEN at this point.
Most common orientation is with the opening in the foot toward the center of the van
Use a 3/8” x 3/4" hex head bolt, 3/8” lock washers and a 3/8” flat washer to bolt foot to cross member.
Snug tighten, but allow movement.
