Kargo Master 409TD, Installation Manual, Page: 8 / 15

Instructions – 409TD
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 8
Step 2B – Front Mount on 148” Wheel Base
(Low/Mid/High Roof excluding Extended)

Locate the other threaded inserts at the front of the van. Remove plugs.
** Place sealant around the exposed holes in the roof of the van under the rubber pads to ensure
no water can leak into the cabin of the van. **

Place the mount rail with the tall flange towards center of the van on top of the rubber pad
and black nylon block.

Bolt through the farthest rear slot in the mount rail and corresponding front slot in the rail
using M8 x 45mm bolts with lock washers and flat washers.

The rail should be offset to the front of the
van.
(Passenger side, rear most mount on the rail shown)