For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Page 8
Assembly Instructions
–
4095L
Step 5
–
Install Latch
•
Move rear pan assembly out of
the way to expose the end of
the crossmember.
•
Bolt latch assembly to end of
crossmember using 5/16” x
3/4" carriage bolts
, 5/16” flat
washers
and 5/16”nyloc nuts
.
•
Shown without pan for clarity.
•
Repeat on both ends of rear
bow.
•
TIGHTEN.
Step 6
–
Install Handle
•
Attach the handle to the rear bow assembly in the orienataion shown.
•
Use hardware installed in bow.
•
TIGHTEN.
Step 7
–
Install Rack
•
Follow mount kit installation instructions to finish installation of rack.
GO BACK AND ENSURE ALL HARDWARE IS TIGHT
Your assembly is now complete.
