Kargo Master 40649TL, Instruction Manual, Page: 10 / 13

Installation Instructions – 40649TL
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 9

Using the 9/16” box wrench, hold the plus nut tool stationary and then tighten hex head bolt until plus
nut is tightly gripping and does not spin when hex bolt is loosened.

DO NOT overtighten plus nut.
Step 8 – Installing Partition to Floor

Place assembled partition with wings
back into van. Align with previously
installed plus nuts.

Along the floor, at each plus nut, bolt
through partition panels using
1/4" x 1-1/4” hex head, 1/4" lock
washer, and a 1/4" flat washer.

Insert nylon spacer underneath
partition if needed.

Snug tighten.