Installation Instructions – 40201
For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Page 3
Remove straps.
Set tank strap bracket in place.
Mark the location of the four slots onto the
installation surface.
Set aside tank strap bracket.
Using a 17/64” (or H) drill bit, drill a hole through
the installation surface at each location marked.
Using four 1/4” x 5/8” flanged hex head screws and four
1/4” flanged lock nuts, install tank strap bracket onto
installation surface.
TIGHTEN all hardware.
Attach straps.
NOTE: Straps may be used in any of the three sets of rings,
depending on tank in use. Taller tanks should use top rings
for stability.
Strap Ajustment
To tighten strap, pull on strap.
To loosen stap, pull outward on strap adjuster flange.
GO BACK AND ENSURE ALL HARDWARE IS
TIGHTENED.
ASSEMBLY IS COMPLETE
MARK &
DRILL
MARK &
DRILL
MARK &
DRILL
MARK &
DRILL
MARK &
DRILL
MARK &
DRILL
MARK &
DRILL
MARK &
DRILL
