Karel LT48, Mini User'S Manual

Page: 12 / 45

How To Program Memory Keys On LT26(-H)
Each Memory Key may be used for two different
functions: Primary Function and Secondary
Function. The Primary Functions are preset for
extensions and lines as given below:
1. When connected to an MS26 system:
Extension 11 Extension 15
Extension 12 Extension 16
Extension 13 Vacant
Extension 14 Vacant
Line 01 Line 02
2. When connected to an MS14 system:
Extension 11 Extension 15
Extension 12 Extension 16
Extension 13 Extension 17
Extension 14 Extension 18
Line 01 Line 02
Following are the main points to program the
Memory Keys:
Œ
The secondary function of a Memory Key (also
the primary functions of the keys shown as Vacant)
can be programmed for a Private Pool number,
using the Private Pool sub-menu in the Setting
Mode.
Œ
If a Private Pool number is to be assigned to its
primary function, the key should be pressed until
the first "beep". If a Private Pool number is to be
assigned to its secondary function, then the key
should be pressed until the second "beep".
11