Karel ip112, User Manual

Page: 80 / 102

IP TELEPHONE SET
69
Reset to Factory
You should reset the phone only in this case: the phone configuration was changed and
the phone is not functioning anymore. To maintain the configuration of the phone, you
need your system administrator or service provider’s advice.
To reset to factory via phone interface:
1) Press the Menu->Settings->Advanced Settings
2) You are prompted to enter the required password, the default one is
admin .
3) Scroll to Reset to factory option, and press Enter hot key to enter the configuration
interface.
4) You are prompted to confirm the change, press OK hot key to reset to factory settings,
or press Cancel hot key to return to previous menu.
5) It will take a few minutes to reset, please do not power off during resetting, or it will
cause flash memory error.
Note:
The reset to factory option must in the admin mode.
To reset to factory via Web interface:
1) Choose
Upgrade->Basic.
2) Click Reset button.
3) You are prompted to confirm the change, press OK to confirm the changes, press
Cancel to cancel the operation.
Note:
If you confirm all current setting changes including contact list, call history, account
settings, etc will be lost, you need to export the configuration first if you still want to import
the old configurations after reset. Or your phone must be configured a new manually
unless mass provisioning is used!
To Export/Import the old configuration file via Web interface:
1) Choose Upgrade->Advanced, select Import/Export Configuration, choose Export
button to export the file to your local computer.
2) Choose Upgrade->Advanced, select Import/Export Configuration, choose Browse
button, select the specific configuration file in your local computer, choose Import
button.
3) It will take a few minutes to reset, please do not power off during resetting, or it will
cause flash memory error.